AMERIFORM® DRY FILM LUBRICANT

Cut metal forming costs by 15% or more.

A multi-patented dry film lubricant built for the metal forming industry — versatile enough for the easiest draws, tough enough for the most difficult ones.

Request a Sample or call 810.989.9175

15%+

Typical reduction in operational cost, including the metal substrate itself

$1.5M+

Saved by one Tier 1 exhaust supplier after eliminating its parts‑washing step

Zero

Rejects on HDG .054 inner pillars, down from a reject rate near 100%

What Ameriform does

AMERIFORM® is a multi-patented dry film lubricant for the metal forming industry — the most advanced product on the market today, versatile enough to handle the easiest to the most difficult draws. Across our customers' lines it has reduced operational costs, including the cost of the metal substrate itself, by a minimum of five percent and usually well above fifteen.

See how it applies to your line →

Forming film thickness< 0.1 mil

Substrate cost savings5 – 15%+

Draw difficultyEasiest to hardest

Forming examples

Real parts, real results

STAINLESS CLUTCH HOUSING

The only lube capable of consistently producing a quality part, at a forming film thickness of 175 mg/ft² — less than 0.1 mil.

HDG .054 INNER PILLAR

Before Ameriform, the reject rate ran close to 100%. After switching to Ameriform's dry film lube, there were no rejects.

Cut metal forming costs by 15% or more.

What Ameriform does

Forming examples

See what Ameriform can do for your operation.