This aluminum heat shield was running over 40% rate with 8 people required to run the press and remove forming oil. Today the press is coil fed with 1 person unloading/ inspecting. The thru put is increased by over 10% with no rejects.
j
Forming Examples
This stainless Transmission clutch housing is the only lube capable of consistently producing a quality part. Forming film thickness of 175 mil grams/ft2 (less than .1 mil). r
HDG .054 Inner Pillar Before Ameriform the reject rate was close to 100%. After changing to Ameriform as the forming dry film lube, there were no rejects